Bag manufacturer in Jinhua, China · since 1995 · MOQ 500 stock / 1,000 custom [email protected] EN RU ES PT DE
FEIMA Custom bag manufacturer Send an enquiry

Blog · Choosing a bag

School backpack size: start with the items and opening

A tall backpack and a wide opening answer different questions. When choosing a school-bag range, begin with the books, folders and smaller items your customers carry. Then bring those details to the model discussion.

FG-112 green school backpack carried on the front, showing its main zip and separate large pocket
The short answer

Start with the actual books, folders and other items, including their covers. Use the bag’s listed dimensions to make a shortlist, then discuss the main opening and separate pockets with your salesperson. A model photo and your item measurements give the sample room a useful starting point.

Write down the kit, including its covers

A folder, a stack of books and a pencil case give the size discussion something concrete. Measure the largest item with its cover or case in place, then note the thickness of the group you want to carry together. A ring binder can have a different outline from a soft notebook, even when their paper is the same size. A photograph beside a ruler helps explain that difference. Include the bottle or lunch container if it belongs in the same kit, and say which smaller items you would prefer to keep in a separate pocket.

Read bag dimensions as a starting point

The listed size of FG-116A is 30 × 14 × 42 cm, in length × width × height order. Those are bag dimensions, rather than a measurement of the space inside or the width of its opening. Seams, the opening curve and the chosen interior arrangement form part of the actual version. A size comparison helps narrow the shortlist; it does not establish that a particular device or folder fits. Share the item measurements with your salesperson so we can discuss the opening and layout together.

FG-116A mesh backpack with white trim and a separate horizontal front zip pocket
FG-116A: listed size 30 × 14 × 42 cm, L × W × H. The photograph shows the body and zip arrangement, rather than internal measurements.

Separate the main opening from front pockets

FG-112 has a rounded top zip and a large projecting front zip pocket. FG-116A has a mesh body and a separate horizontal front zip pocket framed by white trim. Each front pocket has its own opening, apart from the main section. When looking at these models, consider which items belong in the main body and which should have a separate place. The visible zip line shows the opening arrangement; its length in a photograph does not give a usable opening measurement. We can bring your preferred arrangement into the sample brief.

FG-112 school backpack with a rounded main zip and separate projecting front pocket
FG-112: the rounded main top zip and large front pocket are separate openings.

Turn your item list into a range proposal

If you like the body but need a different opening, pocket or size, our pattern room can develop that direction with your brief. The designer can first show your logo and colours in a free visual. For several sizes, keep the shared brand direction and list the differences on separate model lines: the item kit, opening, pockets, material, colour and quantity. Your salesperson keeps the chosen details and sample feedback together, follows the order through shipment arrangements and brings proposed changes back to you. Stock styles start at 500 pieces per model and colour; custom versions start at 1,000. Stock samples take 7 days and custom samples take 15 days to prepare, plus courier time. Send your item list and a model reference, or see how sampling works.

Questions about this choice

Questions about backpack size and openings

Can I choose a school backpack from its height alone?

Height is one reference. The largest item, its cover, the thickness of the planned kit and the opening arrangement also belong in the brief. Share those details with your salesperson so the model and layout can be discussed together.

What should I send for a different size or opening?

Send the model code, a photo or sketch, the measurements of the intended items and your preferred pocket arrangement. Your salesperson brings these into the development brief, with the selected details recorded for the physical sample.

How do I arrange and pay for backpack samples?

Send the selected styles and the number of samples you want, with any size, pocket or logo changes. We calculate the sample charges and courier freight together before you pay. PayPal is available; a local account for a small payment can also be discussed in some regions. Your contact confirms the available payment details with the quote and follows the sample preparation and dispatch with you.

When should we start if the bags are needed for a school launch?

Tell us the date you need the bags to arrive, destination, models and quantities by colour. Your contact can review an available stock option or a custom development plan with you. Allow for sample preparation, courier delivery, your review, production and onward transport as separate stages. If the brief changes, we discuss its effect on the calendar before updating the agreed version. The shipping and import guide explains how transport choices fit into that plan.

Can one school range include several backpack sizes?

Yes. Our designer can carry the same logo and colour direction across the range while the pattern room develops the opening and layout for each size. Each model keeps its own item measurements, sample reference and quantity by colour. Your named contact gathers the feedback into one range proposal, so a change to one size can be reviewed without losing the agreed details of the others.

Should the main compartment and front pocket be measured separately?

Yes, when the kit is split between them. Note which items go in each area and their dimensions so the pattern room can review the opening and pocket layout.

The details that matter

The item list and opening at a glance

  • Include covers and casesRecord the largest item and the combined thickness of the kit you intend to carry.
  • Keep body and interior dimensions separateFG-116A’s listed 30 × 14 × 42 cm size helps compare outlines; it does not prove item fit.
  • Give each pocket a roleThe main zip and front zip are separate openings on both featured backpacks.
  • Bring the kit into the briefYour salesperson and pattern room can work from the item measurements, preferred model and changes.

From the range

Two opening layouts to discuss

The model photographs give you a starting point for the main body and front pocket. Share the items you want to carry when discussing the size and layout.

Explore school-bag models →

Planning the next step

Samples, development and school-bag options

Keep reading

Send a drawing, a photo, or just a sentence.

Share the model or idea, quantity and destination. We will help with the material, branding and sample options, then prepare the production plan around your order.

Feima has made bags in Jinhua since 1995. A salesperson prepares your project details, and the sales manager oversees progress.